Product Category

Drills, Impact Drills & Screwdrivers

Explore Drills, Impact Drills & Screwdrivers
GH Hardware category image

Product Catalogue

Filter

Showing 65–80 of 91 results

Sort:
Show:
MAKITA DHP458RFE 13mm 1/2″ 18V Cordless Hammer Driver Drill
Add to wishlist

MAKITA DHP458RFE 13mm 1/2″ 18V Cordless Hammer Driver Drill

RM1,670.00
In Stock
  • Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
  • Dual LED lights with afterglow enhanced illumination of work area
  • All metal ratcheting chuck engineered to prevent bit slippage and improves bit rentention
  • Single sleeve keyless chuck allows for easy bit installation/removal
  • High power to weight ratio obtained by employing a 4-pole motor
Add to cart
MAKITA DHP484Z 13mm 1/2″ 18V Cordless Hammer Driver Drill (Solo)
Add to wishlist

MAKITA DHP484Z 13mm 1/2″ 18V Cordless Hammer Driver Drill (Solo)

RM791.10
Available on backorder
  • Variable 2-speed (0-500 & 0-2,000 RPM) for a wide range of drilling, fastening and hammer drilling applications
  • BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
  • Built-in dual LED lights with pre-glow and afterglow functions illuminate the work area
  • Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
  • Convenient 13 mm (1/2") keyless chuck for quick bit changes
Add to cart
MAKITA DHR242 24mm 15/16″ 18V Cordless Combination Hammer
Add to wishlist

MAKITA DHR242 24mm 15/16″ 18V Cordless Combination Hammer

Price range: RM1,004.00 through RM2,016.70
Out of stock
  • BL motor is electronically controlled to optimize battery energy use for longer run time per charge
  • 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications
  • One touch sliding chuck enables quick and easy bit changes
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Variable speed trigger allows operator to adjust speed based on materials or application
Select options This product has multiple variants. The options may be chosen on the product page
MAKITA DHR242 24mm 15/16″ 18V Cordless Combination Hammer
Add to wishlist

MAKITA DHR242 24mm 15/16″ 18V Cordless Combination Hammer

Out of stock
  • BL motor is electronically controlled to optimize battery energy use for longer run time per charge
  • 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications
  • One touch sliding chuck enables quick and easy bit changes
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Variable speed trigger allows operator to adjust speed based on materials or application
Read more
MAKITA DS5000 16mm 5/8″ Drill
Add to wishlist

MAKITA DS5000 16mm 5/8″ Drill

RM1,305.60
In Stock
  • Powerful 750W motor for improved mixing and drilling performance
  • Heavy duty industrial 16 mm (5/8") drill chuck engineered for positive bit retention
  • Rocker switch for quick transition between forward and reverse operation
  • On-board chuck key storage for fast and convenient bit changes
  • D-handle rotates 360° with 24 positive stops for multi-position operation
Add to cart
MAKITA DTD152RFE 18V Cordless Impact Driver
Add to wishlist

MAKITA DTD152RFE 18V Cordless Impact Driver

RM1,481.10
In Stock
  • Developed for main applications such as tightening of self-drilling screws or light duty machine screws
  • Dual LED lights with preglow and afterglow functions illuminate the work area more widely
  • Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
  • Phosphorescent bumper glows in dark places
  • Electric brake for maximum productivity and increased operator safety
Add to cart
Makita DTL063Z 9.5mm 3/8″ 18V Cordless Angle Impact Wrench (Solo)
Add to wishlist

Makita DTL063Z 9.5mm 3/8″ 18V Cordless Angle Impact Wrench (Solo)

RM829.00
Available on backorder
features
  • Compact angle head for easy access to bolts in tight places
Add to cart
MAKITA DTW1001JX2 19mm 3/4″ 18V Cordless Impact Wrench
Add to wishlist

MAKITA DTW1001JX2 19mm 3/4″ 18V Cordless Impact Wrench

RM2,876.70
Available on backorder
  • Electronic 3 stage impact power selection reduces fault tightening
  • Hammer case securely fastened with four bolts
  • Dual LED job light with preglow and afterglow functions
  • Efficient impact system (Max 2,200 IPM) with less vibration
  • Easy-to-operate, push button type F/R change switch
Add to cart
MAKITA DTW300 12.7 mm (1/2″) 18V Cordless Impact Wrench
Add to wishlist

MAKITA DTW300 12.7 mm (1/2″) 18V Cordless Impact Wrench

Price range: RM1,182.20 through RM2,328.90
In Stock
  • 3 modes of reaction time for automatic stop available both in forward and reverse rotation modes
  • Trigger switch with full speed mode allows for less hand and finger fatigue
  • Compact design with a short overall length of 144 mm (5-5/8")
  • Socket can be fixed with C-ring (ring spring)
  • BL motor delivers 330 N·m (240 ft.lbs.) of max torque
  • Variable 4-speed provides fastening control for a wide range of applications
  • Twin LED lights with preglow and afterglow functions for better illumination
Select options This product has multiple variants. The options may be chosen on the product page
MAKITA DTW301Z 12.7 mm (1/2″) 18V Cordless Impact Wrench (Solo)
Add to wishlist

MAKITA DTW301Z 12.7 mm (1/2″) 18V Cordless Impact Wrench (Solo)

RM1,182.20
Available on backorder
  • 3 modes of reaction time for automatic stop available both in forward and reverse rotation modes
  • Trigger switch with full speed mode allows for less hand and finger fatigue
  • Compact design with a short overall length of 144 mm (5-5/8")
  • Socket can be fixed with pin detent
  • BL motor delivers 330 N·m (240 ft.lbs.) of max torque
  • Variable 4-speed provides fastening control for a wide range of applications
  • Twin LED lights with preglow and afterglow functions for better illumination
Select options This product has multiple variants. The options may be chosen on the product page
MAKITA DTW450RME 12.7 mm 1/2″ 18V Cordless Impact Wrench
Add to wishlist

MAKITA DTW450RME 12.7 mm 1/2″ 18V Cordless Impact Wrench

RM1,778.00
Available on backorder
  • Delivers 440 N·m (325 ft.lbs.) of torque for tough jobs
  • Compact ang lightweight design provides superior balance and control
  • Single LED light with independent on/off switch conveniently illuminates the work area
  • Job site tested shock absorbent handle protects the battery housing for extra durability
  • Large bumper, protects workpiece from scratches, increasing manoeuvrability
Add to cart
MAKITA FS2500 Screwdriver
Add to wishlist

MAKITA FS2500 Screwdriver

RM646.70
Available on backorder
  • Precision balance with less weight
  • Powerful 570W motor with 0-2,500 RPM to handle the most challenging applications
  • Built-in LED light illuminates the work area for greater productivity in low-light applications
  • Directional air-flow vents channel the tool's air output away from the user's face
  • Adjustable depth locator assembly with Sure-Lock feature for consistent screw depth
Add to cart
MAKITA HP001GD201 13mm 1/2″ 40Vmax Cordless Hammer Driver Drill
Add to wishlist

MAKITA HP001GD201 13mm 1/2″ 40Vmax Cordless Hammer Driver Drill

RM2,917.00
In Stock
  • Excellent performance in continuous heavy duty applications
  • Outstanding drilling speed; Delivers 20% or more higher speed than previous model
  • Increased max speed (0-2,600 RPM) in High mode for faster drilling speed in light duty applications
  • Variable 2-speed transmission (0-650 & 0-2,600 RPM) for a wide range of drilling, fastening and hammer drilling applications
  • Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop
  • All metal 13 mm self-ratcheting chuck for improved bit gripping strength and durability
  • XPT (eXtreme Protection Technology) is engineered for improved dust and water resistance for operation in harsh conditions
Add to cart
MAKITA HP1630 16mm 5/8″ Hammer Drill
Add to wishlist

MAKITA HP1630 16mm 5/8″ Hammer Drill

RM341.10
In Stock
  • Lightweight with large drilling capacity up to 16 mm in concrete
  • Large 2-finger trigger for added convenience
  • Recessed lock-on button for continuous use
  • Reversing switch is conveniently located
  • Ideal for small self anchoring concrete screws
Add to cart
MAKITA HP2050 20mm 3/4″ 2-Speed Hammer Drill
Add to wishlist

MAKITA HP2050 20mm 3/4″ 2-Speed Hammer Drill

RM565.00
Available on backorder
  • "Hammering with Rotation" or "Rotation Only"
  • Positive stop mode selector prevents accidental mode disengagement
  • Large trigger switch and 360° swivel side handle for added comfort
  • Recessed lock-on button for continuous use
  • Designed for low noise and reduced vibration
Add to cart
MAKITA HP330DWE 10mm 3/8″ 10.8V Cordless Hammer Driver Drill
Add to wishlist

MAKITA HP330DWE 10mm 3/8″ 10.8V Cordless Hammer Driver Drill

RM680.00
Available on backorder
  • Hammer drill mode
  • Lightweight and compact with 2 speed gear selection
  • LED job light with afterglow function
  • Single sleeve 10mm keyless chuck
  • Variable speed trigger switch
  • Electric brake
Add to cart
Cordless Tools 89 products Circular Saws & Saws 83 products Angle Grinders & Metalworking 77 products Sanders, Planers, Routers & Trimmer 68 products Rotary & Demolition Hammers 57 products Industrial Blowers & Vacuums 13 products

RFQ%

Need help finding the right product?

Our team can help you choose suitable tools and equipment for your requirements.

Request a Quotation
WhatsApp Sales