MAKITA DF002GA201 13mm 1/2″ 40Vmax Cordless Driver Drill
Available on backorder
RM2,172.20
Features:
- Aluminum gear housing creates an impression of rigidity and luxuriousness
- Variable 2-speed (0-600 & 0-2,200 RPM) for a wide range of drilling and fastening applications
- Built-in twin LED lights with pre-glow and afterglow functions illuminate the work area
- BL motor delivers 65 N·m (580 in.lbs.) of max torque
- BL motor is electronically controlled to optimize battery energy use for longer run time per charge
- Lightweight for reduced operator fatigue
- Convenient 13 mm (1/2″) keyless chuck for quick bit changes
Available on backorder
Specification:
| Capacity | Wood (Hole Saw): 51 mm (2″) Steel: 13 mm (1/2″) Wood (Auger Bit): 38 mm (1-1/2″) |
| Clutch Torque Setting | 1.0 – 5.0N·m (9 – 44 in.lbs.) |
| Chuck Capacity | 1.5 – 13 mm (1/16 – 1/2″) |
| Max Fastening Torque | Hard: 64 N·m (570 in.lbs.) | Soft: 30 N·m (270 in.lbs.) |
| Max Lock Torque | 65 N·m (580 in.lbs.) |
| No Load Speed (RPM) | High: 0 – 2,200 | Low: 0 – 600 |
| Dimensions (L x W x H) | 164 x 86 x 272 mm (6-1/2 x 3-3/8 x 10-3/4″) |
| Net Weight | 1.9 – 2.5 kg (4.2 – 5.5 lbs.) |
| Work Amount | 990 holes with BL4025 30 mm Thick Melapi with Ø15 mm Auger Bit (High Speed) |
| * Recommended batteries 2.0Ah, 2.5Ah, 4.0Ah
Standard Equipment : Available Options : |
|
*Items of standard equipment and specifications may vary by country or area. Net weight and dimensions may differ depending on the type of battery(ies) used. All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application.
Recently Viewed Products
- Exclusive MaxTorque™ ball end on short arm allows access to screw heads located in tight spaces straight-in or at an angle
- Exclusive MaxTorque™ ball end delivers 50% more torque than conventional ball ends
HTD Spiral Point HSS (SKH) Metric Thread Machine Taps (POT) JIS Grade II
RM56.80 – RM507.20Price range: RM56.80 through RM507.20 In Stock
- Surface black oxide treated HSS spiral point taps for through hole tapping
- Spiral point design push chips forward with low cutting torque
- Pointed end for small sizes up to 6mm
- Flat end for sizes from 7mm upward
- Made of protanium high torque steel.
- Driven through 1/4″ steel plate without distortion.
Need Help?
Copyright © 2026 GH Hardware Sdn Bhd.




