MAKITA DCL180ZB 18V Cordless Cleaner (Solo)
Available on backorder
RM373.30
- Strong suction power for fast cleaning with more run time
- Bagless 2-stage cloth filtration system allows for easier cleaning and quicker debris disposal
- Increased storage capacity for longer time between waste disposal
- Low noise design ideal for quiet cleaning operation in job sites among residential areas
- Filter and pre-filter are washable in soapy water for repeated use
- Sash nozzle for cleaning corners and crevices of a car or furniture
Available on backorder
Specifications
- Weight
- 5 kg
| Capacity | 650 mL |
| Max Air Flow | 1.4 m³/min |
| Max Sealed Suction (water column) | 4.2 kPa (428 mmH₂O) |
| Suction Power | 30 W |
| Dimensions (L x W x H) | 999 x 114 x 152 mm (39-1/4″ x 4-1/2″ x 6″) |
| Net Weight | 1.2 kg (2.6 lbs.) |
| Continuous Use (min) | 33 with BL1850B |
| Standard equipment : ZB: Floor Nozzle, Sash Nozzle, Sash Nozzle Holder, Pipe, Stay, Filter, Prefilter Available options : |
|
| Weight | 5 kg |
|---|
Recently Viewed Products
Features:
Add to cart
- Aluminum gear housing creates an impression of rigidity and luxuriousness
- Variable 2-speed (0-600 & 0-2,200 RPM) for a wide range of drilling and fastening applications
- Built-in twin LED lights with pre-glow and afterglow functions illuminate the work area
- BL motor delivers 65 N·m (580 in.lbs.) of max torque
- BL motor is electronically controlled to optimize battery energy use for longer run time per charge
- Lightweight for reduced operator fatigue
- Convenient 13 mm (1/2") keyless chuck for quick bit changes
- Exclusive MaxTorque™ ball end on short arm allows access to screw heads located in tight spaces straight-in or at an angle
- Exclusive MaxTorque™ ball end delivers 50% more torque than conventional ball ends
HTD Spiral Point HSS (SKH) Metric Thread Machine Taps (POT) JIS Grade II
RM56.80 – RM507.20Price range: RM56.80 through RM507.20 In Stock
- Surface black oxide treated HSS spiral point taps for through hole tapping
- Spiral point design push chips forward with low cutting torque
- Pointed end for small sizes up to 6mm
- Flat end for sizes from 7mm upward
- Made of protanium high torque steel.
- Driven through 1/4″ steel plate without distortion.
Need Help?
Copyright © 2026 GH Hardware Sdn Bhd.





